Fraccaro
Officine Termotecniche
Heating by incandescent heaters is the best technique for large and high rooms. The heater consists of a Venturi pipe and a gas injector. Gas injection speed causes a drop in pressure so that the quantity of air required for correct burning is drawn in. The air-gas mixture is delivered to the mixing chamber and is spread along the entire surface of the heat exchanger. The latter consists of a set of ceramic plates, which, warmed to a high temperature, overheat and radiate the surface areas below. The heater is equipped with a mirror reflector for directing radiation.
Incandescent heaters can be used in foundries, open areas such as canopies, goods loading and unloading areas, extremely high rooms, etc. For indoor applications, burned gas can be exhausted either through a discharge system or inside the room itself, providing mechanical ventilation or through natural ventilation according to the EN131410 standard. Incandescent heaters are the perfect solution for churches – in fact,
SUNRADs are not only on the cutting edge of technology but also beautifully styled. That’s why they have been accepted by the Italian National Institute of Fine
Arts.
Hot Water Thermal Panels WATERSTRIP are suitable for a wide range of industrial and commercial buildings, including factories, warehouses, exhibitions, schools, and sport facilities.
WATERSTRIPs provide either small or big environments with effective and silent heating coupled with no air movement and no dust circulating. Moreover, low heat stratification enables obtaining high savings in energy and running costs.
The FRACCARO
“PUCH” gas thermo-convector is totally independent and self-contained. Once turned on, it spreads heat when and where you want in just a few minutes, with no use of boilers or heating units.
Each appliance is subjected to exacting final tests and is built to meet current safety
standards.
External hole of only 6.5 cm (2.56
in).
Automatic, electronic ignition without
flame.
Completely air-tight appliance, drawing and exhausting burned gas strictly outside, with no possibility of gas
leaks.
Total safety assured by double
solenoid-valve.
Heat exchanger made of porcelain steel.
Built-in room
thermostat.
2-pole ON/OFF switch with light
indicator.
Electronic variator for controlling output
airflow.
Fan ensures smooth air circulating in the environment.
Outer casing in laminated wood assures no danger of
burns.
Switch-on can be controlled by a programming clock suitable for offices, shops and homes.
|  |
