Fraccaro
Officine Termotecniche
If you lean against a brick wall after sunrise on a cold winter morning, you will feel unexpected warmth, even if the external temperature is below zero. This is due to the sunrays warming the environment by heating solid objects.
ENERGOSTRIP heating is based on the same principle: it emits natural and comfortable heat without any cold area or draught.
ENERGOSTRIP is an electricity-fed panel and it is suitable for ceilings from 2 to 10 meters (from 6.56 to 32.8 ft) in height, from small bathrooms to wide industrial
sheds. This is a simple system, with low installation costs and maintenance-free. As it is installed just below the
ceiling, floors and walls remain clear. It is suitable for both total and supplementary heating. These systems can be installed in schools, houses, offices, shops, shopping malls, churches, hospitals, public garages, etc.
Industrial ovens are an example of a special application of radiant heating.
Heat developed by the radiating tubes warms the objects inside the oven. By means of conduction, these objects cause water molecules to evaporate from their surface. Sometimes it is sufficient to heat an object at a particular temperature – in any case, a thermostat controls the heating process. The radiating ovens built by
FRACCARO do not use ventilated air to ensure savings in energy costs. This is clearly shown by the fact that it is sufficient to heat the surface and not the whole object. Radiating oven systems have been successfully created for the purpose of drying marble, for providing high thermal gradients to metal pieces in mechanical processing industries, and for surface heating of freshly painted materials.
Each system is designed according to the heating requirements needed, and it is built with modules of variable thermal power from 10 kW to 100 kW. |  |
